:: SEPOMs SINGAPORE - Lexmark Refill Instruction ::


	Lexmark Refill Instruction

Home > Products > Lexmark > Large Packing > Refill Instruction

1380619	WHAT YOU NEED TO START SEPOMs Refill Inkbottles C,M,Y (included) Needle (included) Pin (included) Damp cloth or towel Printer cartridge

Refill Method:	Remove cartridge from printer according to printer manual. Tap the top of the inkbottle so no ink remains in the top portion. With pin, puncture a hole in the top of the inkbottle. (Fig.1) Attach the needle to the top of the inkbottle. (Fig. 1) With screwdriver, separate the top from the cartridge. (Fig. 2) Match the color codes of the inkbottles to the corresponding colors of each cartridge section. C(Cyan) = Blue, Y = Yellow, M(Magenta) = Red (Fig. 3) With ventilation holes upright, insert needle into the appropriate hole of the cartridge. (Fig. 3) To refill, gently squeeze the inkbottle for 2 seconds then release. Repeat this process until the cartridge is full.(Approx.half bottle) Remove inkbottle and wipe off excess ink from cartridge. Repeat the above steps 2-9 for other colors. Replace the top onto the cartridge and seal it in place on both sides with adhesive tape. (Fig. 4) Shake cartridge firmly to distribute ink evenly. Replace cartridge into printer according to printer manual.

CAUTION! Do not allow cartridge to dry out. This may clog the print head and affect the print quality. Always refill cartridge as soon as it is empty. If your printout does not fill the text or images completely, you may need to clean your print head. Purchase SEPOMs Print Head Liquid Cleaner.