:: SEPOMs SINGAPORE - HP Refill Instruction ::


	HP Refill Instruction

Home > Products > HP > Large Packing > Refill Instruction

C6656A / C8727A	WHAT YOU NEED TO START Ink Cartridge Rubber Pad Cap Opener Push Pin Ink Bottle Tissue Papers Ink bottle cap

Refill Method: 1. Lift up Sticker on the Cartridge	Remove cartridge from the printer according to printer manual. Life up the sticker at the top to revel the refill hole as shown.

2. Poke a Hole with Push Pin
Tap the top of the inkbottle so no ink remains at the top portion. With push pin, puncture a hole at the top of the inkbottle.

3. Poke a Hole with Pin	To refill, insert inkbottle into the refill hole, gently squeeze the inkbottle for 3 seconds then release. *(To avoid ink spills, do not press too hard)* Repeat this process until the cartridge is full. Observes the bottom print head, once ink ooze out, the cartridge is full.

4. Test Cartridge
Remove inkbottle, clean the surface and press the sticker back. Gently press the print head onto a piece of tissue paper. (Case 1) If ink stains even on the tissue paper, it is ready to use. (Case 2) If no ink, refer to point 5.

5. Shake Cartridge/Clean Print Head If no ink, (Case 1) It may be due to air blocking at the print head passage. Wrap tissue paper over the print head and shake the cartridge downward for a few times. Test on a piece of tissue paper again. (Case 2) Due to infrequent use of the cartridge, ink may have dried and clogged the print head. Please purchase SEPOMs Print Head Liquid Cleaner to dissolve the dried ink at the print head.

CAUTION! To Preserve unused ink, cover inkbottle with cap and store in a dry, cool place. Do not allow cartridge to dry out by printing. If printout of text or image is not complete, you may need to clean head. Purchase SEPOMs Print Head Liquid Cleaner for head cleaning of dry ink.

top