51649A	WHAT YOU NEED TO START SEPOMs Refill Inkbottle (included) Cap opener (purchase) Needle (included) Pin (included) Printer cartridge SEPOMs stickers (included)
Refill Method:	Remove cartridge from printer according to printer manual. Separate the cap from the cartridge using the cap opener. S-25CO (Need to purchuse separately) (Fig. 1) Tap the top of the inkbottle so no ink remains in the top portion. With pin, puncture a hole at the top of the inkbottle and attach the needle. (fig. 2) Match the color codes of the inkbottles to the corresponding colors of each cartridge sections. C(cyan) = blue, Y = Yellow), M(Magenta) = red). Insert tip of needle into the center hole of the cartridge according to the drawing. Make sure that the ventilation hole is upright (fig. 3) To refill, gently squeeze the inkbottle for 3 seconds then release. Repeat this process until the ink appears at the printhead. (Approx. Half bottle). Remove the inkbottle and wipe off excess ink from the cartridge. Repeat above steps 3-8 for other color, if necessary. Replace cap back to the cartridge & tape both sides with SEPOMs Stickers. Gently press the print head on to a piece of tissue. If the ink stains on the tissue, it's ready for use. If not, it may be due to the present of air bubbles. Shake the cartridge with the tissue wrap over the printhead. Replace cartridge into the printer according to printer manual.
CAUTION! Do not allow cartridge to dry out. This may plug the print head and damage print quality. If your printout does not fill the text or images completely, you may need to clean your print head. Purchase SEPOMs Print Head Liquid Cleaner. To preserve unused ink, insert the pin into the top of the inkbottle and store in a dry, cool place.

top  

Copyright © 2004-2006 SEPOMs Singapore. All Rights Reserved.