51641A	WHAT YOU NEED TO START SEPOMs Refill Inkbottles C, Y, M (included) Cap Pin (included) Damp cloth or towel Printer cartridge Tissue paper
Refill Method:	Remove cartridge from printer according to printer manual. Locate the vent hole at the top of the cartridge & use the screw to push in the plugs to open the vent hole for refilling. If unable to push in, then screw out the plugs.(Fig.1) Tap the top of the inkbottle so no ink remains at the top portion. With cap pin, puncture a hole at the top of the inkbottle. (Fig. 2) Match the color codes of the inkbottles to the corresponding colors of each cartridge section. C=Cyan(blue), Y=Yellow, M=Magenta(red) Insert the tip of the inkbottle into the refill hole. (Fig. 3) To refill, gently squeeze the inkbottle for 2 seconds then release. Repeat this process until ink begins to appear at the print head, located at the bottom of the cartridge. (Fig.3) Repeat steps 6-7 for other colors. Remove the inkbottle and wipe off excess ink on the cartridge. Gently press the printhead onto a piece of tissue. If 3 colors stains on the tissue, it is ready for use. (Fig.4) Replace cartridge into printer according to printer manual. If not, it may be due to the presence of air bubbles.(refer to pt.11) Insert the inkbottle into the refill hole of the respective color & squeeze the bottle to exert pressure into the cartridge until ink bubbles can be seen at the printhead. Repeat this step for other colors, if necessary. Test on the tissue again. If there is no ink, then the print head may be clog by dried ink. Use SEPOMs Print Head Liquid Cleaner to dissolve the dried ink.
CAUTION! Do not allow cartridge to dry out. This may clog the print head and affect the print quality. ALWAYS REFILL CARTRIDGE AS SOON AS IT IS EMPTY. If your printout does not fill the text or images completely, you may need to clean your print head. Purchase SEPOMs Print Head Liquid Cleaner.

top  

Copyright © 2004-2006 SEPOMs Singapore. All Rights Reserved.