:: SEPOMs SINGAPORE - HP Refill Instruction ::


	HP Refill Instruction

Home > Products > HP > Large Packing > Refill Instruction

51641A	WHAT YOU NEED TO START Ink Cartridge Rubber Pad Cap Opener Push Pin Ink Bottle Tissue Papers Ink bottle cap

Refill Method: 1. Fit Cartridge into Holder	Remove cartridge from printer according to printer manual. Press AB of the holder and insert the cartridge into the holder as shown.

2. Push Open the Vent Hole
Locate the vent hold at the top of the cartridge and use the tip of the unopened inkbottle to push open the vent hole.

3. Poke a Hole with Pin	Tap the top of the inkbottle so no ink remains at the top portion. With push pin, puncture a hole at the top of the inkbottle.

4. Match the Colours and Refill
Match the colour codes for the inkbottles to the corresponding colours of each cartridge section. C (cyan) = blue, M (magenta) = red, Y = yellow. Insert the tip of the inkbottle into the refill hole. To refill, gently squeeze the inkbottle for 2 seconds then release. Repeat this process until no ink can be filled in. repeat steps 3-4 for other colours.

5. Test the Cartridge	Gently press the pint head into a piece of tissue paper. If the 3 colours stain on the tissue paper proportionately, it is ready for use. Replace cartridge into printer according to printer manual. If the 3 colours mix at the print head, just absorb it with a piece of tissue paper. If there is no ink on the tissue paper, there may be some air bubbles trapped in the print head which block the ink from flowing out. (refer to step 6)

6. Shake the Cartridge
Wrap a piece of tissue paper over print head, hold the cartridge with the print head facing downward and shake the cartridge a few times in order to shake out the air from the print head. Test on a piece of tissue paper again. If there is still no ink, then the print head may be clogged by dried ink. Use SEPOMs Print Head Liquid Cleaner to dissolve the dried ink.

CAUTION! To Preserve unused ink, cover inkbottle with cap and store in dry, cool place. Do not allow cartridge to dry out by printing. If printout of text or image is not complete, you may need to clean head. Purchase SEPOMs Print Head Liquid Cleaner for head cleaning of dry ink.

top