51626A / 51633M / C1843A	WHAT YOU NEED TO START SEPOMs Refill Inkbottle (included) Magic Rubber Pad (included) Pin (included) Damp cloth or towel Printer cartridge
Refill Method:	Remove cartridge from printer according to printer manual. Locate the ventilation hole at the bottom of the cartridge. (Fig. 1) Remove paper from rubber pad and align one of the hole on the rubber pad exactly over the ventilation hole of the cartridge and stick it firmly. (Fig. 2) Tap the top of the inkbottle so no ink remains in the top portion. (Caution: Do not poke any hole on the cartridge.) With pin, puncture a hole in the top of the inkbottle. (Fig. 3) With the refill hole upright, insert the tip of the inkbottle into the hole of the rubber pad so it rests against the ventilation hole of the cartridge. To refill, gently squeeze the inkbottle for 2 seconds then release. Repeat this process until the cartridge is full. (Fig. 4) After refilling, overturn the cartridge to see if it leaks. If yes, proceed to pt.9. If no, proceeed to pt.10. Squeeze out the air from the emptied inkbottle, while squeezing, re-insert the inkbottle into the rubber pad and then release to extract excess air inside the cartridge to stop leakage. Remove rubber pad, and wipe off any excess ink from the cartridge. Replace cartridge into printer according to printer manual.
CAUTION! Do not allow cartridge to dry out. This may clog the print head and affect the print quality. If your printout does not fill the text or images completely, you may need to clean your print head. Purchase SEPOMs Print Head Liquid Cleaner. To preserve unused ink, insert the pin into the top of the inkbottle and store in a dry, cool place.

top  

Copyright © 2004-2006 SEPOMs Singapore. All Rights Reserved.